logo

HipDeck

Pricing
Schedule a Demo

← Back to all articles

Warehouse Digital Signage: How to Build a Loading Dock Assignment Board

By HipDeck

Updated

Warehouse worker checks loading dock assignments on a wall-mounted digital board

A loading dock assignment board shows dispatch staff which trucks are waiting, which doors are assigned, and what needs attention. Start with a screen inside the staffed dispatch office. Keep the dock scheduling system or dispatch log as the source of record, and use the site’s existing radio, phone, or in-person procedure to authorize vehicle movements.

Decide what belongs on the dispatch screen

Start with a short list of active exceptions and arrivals. Give each row a queue ID, door, status, and next action. Add the local time the assignments were last verified, and remove completed loads so staff can spot the work that still needs attention. Here are illustrative rows for one shift.

  • Q-17 · Door 04 · Waiting · Call driver after the dock lead confirms the door is ready.
  • Q-18 · Door pending · Checked in · Hold in the designated waiting zone.
  • Q-19 · Door 06 · Hold · Dispatch to confirm reassignment.

Keep the active list visible on one slide. Use words such as “Waiting,” “Called,” and “Hold” even if you also use colors. Agree on what each status means. For example, “Called” means dispatch contacted the driver through the approved channel, while “Waiting” means no movement has been authorized. If you later install a separate display for visiting drivers, use a sanitized queue ID and approved instructions. Keep names, phone numbers, shipment details, and internal notes off that display.

Handle a door change without leaving two instructions in circulation

  1. Put the old assignment on hold in the source of record. Confirm the replacement door with the dock lead. If the driver was already called, contact them through the established channel and confirm they received the correction.
  2. Update the existing queue entry. During the handoff, the board could say “Q-19 · Hold · Await dispatch.” When dispatch confirms the replacement, change that row to show Door 08 and the new status. Clear the old door assignment wherever it was communicated.
  3. Check what the display actually shows, then note the reassignment for the incoming shift. If the screen still shows Door 06, use the dispatch log and direct call-up procedure until the display catches up.

Start with a slide or use a display-only sheet

If your team handles a small number of changes, build the board as a text slide and assign one editor per shift. Keep a short handoff note with outstanding holds and the time the board was last checked. If nobody can maintain a second list alongside the dispatch log, keep the screen limited to information the team can reliably update.

If multiple staff need to edit the board, use a dedicated Google Sheet containing only information approved for publication. HipDeck documents embedding a published sheet. Use a separate file, publish the approved tab only if your organization permits it, and test access in a signed-out browser. Do not publish an internal dispatch workbook or assume your warehouse management system can be embedded. Test the delay between a sheet edit and what appears on the screen. See the Google Workspace embed guide.

A disconnected display can show outdated information. If staff cannot verify the board is current, switch to the dispatch log and direct confirmations. Practice this handoff with the actual player, including whether the display resumes after a restart. HipDeck describes what requires a connection in its offline playback guide.

Pilot one screen during one staffed shift

  1. Use an indoor display at the dispatch desk and pair a supported player. Test the intended device with your actual board, including legibility, startup, and recovery after a restart. Follow the first-screen pairing guide and check HipDeck’s supported hardware guides for device-specific setup.
  2. Rehearse with sample data before using live assignments. Ask the next shift lead to identify the held truck and the last verified update time without help. Then run a planned door change and record whether staff spotted it and how long it took to appear.
  3. Simulate a network interruption during the rehearsal. Confirm staff can resume the existing call-up procedure immediately and verify the correct assignments after the screen reconnects. Expand only if another location has a clear audience and a named owner.

Use the HipDeck trial to test one dispatch screen. HipDeck lists a seven-day trial with one screen included and no credit card required. Growth is $8 per screen per month. Start with a short queue, one door reassignment, and one shift handoff.


logo

HipDeck

LinkedIn

Contact

Phone/SMS: (385)-439-0897

Hours: 9AM - 5PM Mon - Fri MST

Email: [email protected]

Product

Features

Pricing

White Label

Schedule a Demo

© 2026 HipDeck. All rights reserved.